How To Prevent Inventory Get Mold In Wet And Rainy Season?

As we all know, in rainy or humid weather, everywhere is full of humid air, many factories or enterprises may therefore be affected by varying degrees of moisture damage, in footwear factories and other large warehouses, warehouses filled with raw materials, finished products, semi-finished products, once the storage environment humidity is too high, it is easy to cause mold, fading, rust, odor or spotting and other situations, thus affecting the quality of products and Normal use, resulting in irreparable economic losses!

Image from the network, if invasion must be deleted

According to the investigation of air quality by the authority, the relative humidity of the air in the garment warehouse should be controlled within 60% RH, and the humidity should not be higher than 55% RH in the cold and dry winter, and not more than 60% RH in the rainy summer, only under such humidity conditions, the relative humidity of the air can be most suitable for the storage of various garments.

Image from the network, if invasion must be deleted

In rainy days or continuous rainfall season, the air humidity is often higher than 80% RH, along with the climbing temperature, mold ushered in a high season, so how do we control the storage humidity? TOPONE - the advocate of comprehensive anti-mold solution, by visiting the actual situation of factories all over the world, combined with the consideration of the factory's cost consideration of dehumidifier/desiccant and the safety hazards involved in the transformation of storage lines, etc., put forward the moisture control solution of [Top-1000 desiccant] for customers, to more economically and effectively improve the storage desiccant's dehumidification performance.

It is understood that the now known warehouse, generally use dehumidifier, lime desiccant, silica gel desiccant, sachet calcium chloride desiccant as the main direction of dehumidification in the warehouse.

Among them, the dehumidifier's moisture absorption effect is beyond doubt, a key to open, can control the relative humidity of the warehouse at about 50-60% RH, can achieve the effect of positive prevention and removal of moisture, to avoid warehouse-style clothing, clothing, metal buttons damaged, wet and rusty. But the cost behind it is not to be underestimated! First, the purchase cost of dehumidifiers, a dehumidifier costs thousands, if you use a power 1500W dehumidifier per 100 square, its cost you can combine their warehouse area to do the calculation, in addition to the huge power loss started by each time the machine is turned on, the future electricity cost estimates, is not a small costs; second, the installation of dehumidifiers involves circuit modification, drainage and other issues, if your warehouse is rented, dehumidifier can not be installed is the first problem, drainage is not good is easy to cause secondary pollution; Finally, the electrical appliances in the process of use, will face a fire hazard with electricity, especially for large warehouses, this risk index is very high.

Although the traditional lime desiccant and silica gel desiccant are inexpensive and can achieve a certain effect of moisture absorption, the moisture absorption rate is not so considerable, in addition, they also face the risk of broken bags, swollen bags and pollution, and the replacement is a waste of manpower and material resources, which is not cost-effective for smart entrepreneurs.

 In order to fundamentally solve the customer's warehouse moisture problem and help the warehouse to do a good job of moisture and mold prevention, Topone's anti-mold engineering department, sales team and experimental team jointly developed 【Top-1000 desiccant】

-01-

Top-1000 desiccant

      Topone Top-1000 desiccant, 1KG large-capacity package, moisture absorption rate up to 250% (data show that in a space of 1000 square meters, using 500 packages of warehouse-type desiccant can absorb 1000kg + water vapor), with the following characteristics:

(1) Anti-percolation design, the water vapor absorbed in the package will not seep out;

(2) With visualization of moisture absorption pane, the effect of moisture absorption can be seen at a glance!

(3) the use cycle of more than 3 months, easy to operate, saving you the trouble of replacement ~

(4) economical, more cost-effective!

(5) easy to operate, can be put into use directly;

-02-

Topone factory anti-mold services

      If you have more mold and moisture problems, you are welcome to consult us at any time! Topwan mold engineering department will provide you with: accurate instrumentation testing, mold risk assessment, comprehensive mold prevention advice, online / offline training, etc.. Our mold services have: specific directional, scientific rigor, timely feedback, mold universal characteristics, based on the fundamental, to solve the actual mold problems in factories.