Why use TOP-1000 in the transport of products?   In the transportation of products, there may be cases when goods are transported from low temperature areas to high temperature areas, or when the storage environment of goods suddenly changes from cold to hot, water vapour in the air will condense on the surface of the goods or their packaging and form water, a phenomenon also known as “goods sweat”. This is a phenomenon that should not be ignored. So do you know why you need to use Sunflower desiccant? Here is the answer from Topone for you.   I. Why use Top-1000?   (1) Compare with dehumidifier. Sunflower warehouse type desiccant is more economical and applicable compared with dehumidifier which is started for a long time.   (2) Compare with quicklime desiccant. The moisture absorption performance of quicklime desiccant is limited, around 35%, and it will be pulverized after absorbing moisture, which is easy to cause secondary pollution of storage environment. The moisture absorption performance of warehouse type desiccant is good, and the contents liquefy directly lock the moisture in the bag after absorbing moisture, which will not make the medicine liquid seep out. The whole bag can be discarded directly at the end of the use cycle, which is convenient to operate.   (3) Compare with sachet calcium chloride desiccant. The use cycle of sachet calcium chloride desiccant can be maintained for one month at most, and it is more consuming in terms of manpower and material resources to replace it, while the moisture absorption cycle of Top-1000 is longer and can be maintained for 2-3 months.   II. Topone publicity.   In addition to the supply of dry products, Topone can provide a factory inspection service to assist you in identifying potential moisture damage risks within your factory and can issue a step-by-step improvement plan to help you reduce the risk of moisture damage at the source.   ①Topone can assess the risk of mold on a factory-by-factory basis. ② detecting whether there are relatively large mould vulnerabilities in the environment. ③Checking whether the moisture content of packages is within normal values and taking samples back for evaluation. ④assessing whether there are any mould misconceptions in the operation process of the equipment, etc. ⑤ according to the above situation one by one to make the plant's customized mold prevention program.   The above is to introduce the relevant information about why Top-1000 is used in the transportation of products, I hope it can help you, and will continue to update the related consultation about Top-1000, please pay attention and welcome the consultation.

Why is the export of furniture susceptible to moisture and mold?   In recent years, due to the impact of the epidemic supply chain, port congestion, the original logistics time lengthened a lot, so sellers also need to take into account the pre-treatment of some furniture products moisture storage to avoid affecting sales due to product moisture.     Furniture is generally wood or leather-like materials, rich in protein, starch, oil and other elements, itself has the nutrient environment required for the growth of mold, plus, furniture products in the transportation process, the container temperature difference between day and night, vulnerable to the container rain, moisture brought about by the infringement, easy to cause mold, bacteria and damage to the goods, resulting in huge losses. For example, leather furniture is easy to harden after the moisture, some corners of the surface mold, and even some furniture will be deformed after the moisture, fading; artificial board furniture is easy to expand and damage after the moisture, and rattan furniture due to more crevices, it is easy to hide ash, humid and hot environment is easy to make the rattan furniture crevices produce mold.   Then import and export furniture how to do a good job of preventing moisture!         How to prevent furniture from damp?   Here are 4 suggestions for you to prevent furniture products from getting damp.     First, in the warehouse, equipped with a humidity tester, and arrange for the duty officer to do daily written humidity detection, records, timely follow-up of the humidity situation, to ensure that the humidity of the warehouse in a reasonable range of values.       Second, in the warehouse, equipped with a dehumidifier power supply to match the warehouse area. Strictly control the relative humidity of the air in the warehouse at less than sixty percent, and control the outdoor drainage of the dehumidifier pipeline, timely cleaning of the dehumidifier filter.     Third, try to shorten the storage time of the packaging in the warehouse and the shipping time after the finished product is completed.   Fourth, the desiccant with strong moisture absorption capacity is placed in the furniture, which can reduce the relative humidity of the air inside the sofa to a certain extent. It is recommended to use sunflower desiccant with it. Sunflower desiccant can absorb moisture in the air and goods in all directions, at least 200% of its own weight (laboratory: 280%), which is more than 10 times of the effect of ordinary desiccant, and continues to absorb moisture within 60 days, which can completely ensure that the customer's goods are in good condition and not affected by moisture when they are delivered to the destination.     Fifth, when exporting containers, CASANO container drying rod is hung in the container to reduce the relative humidity of the air in the container, prevent the container from getting wet and avoid moldy products.     The transaction of goods can not be separated from the strict product control and product storage management, storage environment as finished products, semi-finished products, raw materials flow of the transit station, is an important link of product storage, good storage of mold and moisture, to ensure the safety and stability of the transport process, not only to reduce the economic loss of enterprises, but also to maintain a good brand image, to empower enterprises.   About us   Topone anti-mold technology specializes in the research, development and production of anti-mold, anti-bacterial, moisture-proof and anti-odor products, aiming to provide comprehensive solutions for mold prevention of shoes and clothing, bags, furniture, gift packaging and other products, and reduce the claims and losses caused by moisture and mold in the storage process. Topone anti-mold products are the first to complete the EU REACH pre-registration, is the first mainland through the Biocide Product Regulation (BPR) and the U.S. Environmental Protection Agency (EPA) certification of registration, product quality in full compliance with the latest laws and regulations in Europe and the United States. While the products keep seeking new and changeable, we take the responsibility of reasonable price, high quality products and comprehensive service to ensure the highest interest of our customers. If you have questions about molds, please feel free to contact us!