Why use TOP-1000 in the transport of products?
In the transportation of products, there may be cases when goods are transported from low temperature areas to high temperature areas, or when the storage environment of goods suddenly changes from cold to hot, water vapour in the air will condense on the surface of the goods or their packaging and form water, a phenomenon also known as “goods sweat”. This is a phenomenon that should not be ignored. So do you know why you need to use Sunflower desiccant? Here is the answer from Topone for you.
I. Why use Top-1000?
(1) Compare with dehumidifier.
Sunflower warehouse type desiccant is more economical and applicable compared with dehumidifier which is started for a long time.
(2) Compare with quicklime desiccant.
The moisture absorption performance of quicklime desiccant is limited, around 35%, and it will be pulverized after absorbing moisture, which is easy to cause secondary pollution of storage environment. The moisture absorption performance of warehouse type desiccant is good, and the contents liquefy directly lock the moisture in the bag after absorbing moisture, which will not make the medicine liquid seep out. The whole bag can be discarded directly at the end of the use cycle, which is convenient to operate.
(3) Compare with sachet calcium chloride desiccant.
The use cycle of sachet calcium chloride desiccant can be maintained for one month at most, and it is more consuming in terms of manpower and material resources to replace it, while the moisture absorption cycle of Top-1000 is longer and can be maintained for 2-3 months.
II. Topone publicity.
In addition to the supply of dry products, Topone can provide a factory inspection service to assist you in identifying potential moisture damage risks within your factory and can issue a step-by-step improvement plan to help you reduce the risk of moisture damage at the source.
①Topone can assess the risk of mold on a factory-by-factory basis.
② detecting whether there are relatively large mould vulnerabilities in the environment.
③Checking whether the moisture content of packages is within normal values and taking samples back for evaluation.
④assessing whether there are any mould misconceptions in the operation process of the equipment, etc.
⑤ according to the above situation one by one to make the plant's customized mold prevention program.
The above is to introduce the relevant information about why Top-1000 is used in the transportation of products, I hope it can help you, and will continue to update the related consultation about Top-1000, please pay attention and welcome the consultation.