Nano new type environmental protection desiccant is a nano material obtained by using natural aluminosilicate minerals as raw materials and undergoing certain physical and chemical treatment, due to the large surface area, it has excellent moisture absorption and dryness preservation performance, and is non-toxic, tasteless and odourless. It can be consumed by animals in small quantities to improve the function of nutrient absorption, and can be used as an excellent fertiliser after disposal to improve the greening function of the land and dry the mountain environment, and the manufacturing process will not cause any environmental pollution and is inexpensive. It can effectively absorb the water in the environment and is suitable for shoes and clothing, leather products, food, medicine, electronic products, etc. So do you know how to choose the new nano desiccant manufacturers?     1. Advantages   100% natural degradation, no pollution of the environment; Moisture absorption rate can reach 300% of its own weight, which is 10 times of ordinary desiccant.   The normal state (put into the product package) hi time can be as high as 90 days or more, and the moisture absorption locks moisture tightly without back seepage, and will not cause damage to the product.   Efficient moisture-absorbing desiccant products, non-toxic, environmentally friendly, DMF-free extracted from plant starch, moisture absorption rate up to 300% of its own weight (25℃ RH=100%)     2. Manufacturer   Topone is mainly engaged in the research and development and manufacture of products for industrial mold prevention and food external control preservation, and is a manufacturer committed to the research and development, production and sales of desiccant, Anti-Mold chips and other products. We have our own mold-proof sheet manufacturing factory and laboratory, and have more than ten years' experience in the production and sales of mold-proof products. We also have a group of management team and product development technicians. Over the years, we have devoted ourselves to researching various anti-mold products in line with the EU provisions (REACH), and the quality of our products is in line with European and American laws and regulations.   The above is the information about the new nano environmental desiccant manufacturers, we will update you more related information regularly in the later stage, please look forward to it.

Because the circuit in electronic equipment is easy to be damp and rusty, leading to short circuit phenomenon, so the equipment moisture is still very important, and desiccant is needed in the storage and transportation process.   Not only home appliance equipment, many electronic spare parts need to use desiccant, electronic products circuit board is more afraid of moisture, in the factory will be used to desiccant moisture dehumidification, to avoid equipment circuit moisture short circuit.     How to choose a desiccant? Let Topone tell you!  

  How to distinguish the good and bad of desiccant?   1.Judging from appearance, desiccant of good quality has neat appearance, printing, moderate width of sealing, no clip material and full of raw materials. 2. Judging from the packaging material, the good quality desiccant packaging material is thin and uniform, without spots, smooth surface and high strength, the poor quality package material is uneven in thickness, even individual places can obviously see the raw materials, the surface is rough, there are colour spots, rubbing with hands there are fibres falling off, colour loss is serious, squeezing with hands will crack from the seal, easy to tear. 3. Tear open and check the raw materials, good quality desiccant particles are uniform, hand touch will produce heat, but poor quality desiccant feels less obvious, impurities and particles are more. 4. Moisture absorption rate test, if the condition allows, punish the original weight of desiccant, then place it in a humid environment, naturally absorb moisture for 48 hours and then weigh it. The weight of good quality desiccant will increase obviously, then dry it under 105 degree Celsius and weigh it again after three hours. If it is lower than the original weight, it proves that the desiccant does not meet the industry nominal weight and is of inferior quality.    

  What is a southerly day?   A southerly day is a unique weather condition in the southern coast, especially in Guangdong and Guangxi, when the temperature warms up and the humidity rises sharply, causing a return to dampness at the turn of winter and spring.   When the weather is 'southerly', the air is nearly saturated with humidity and everywhere is wet: soggy floors, dripping walls, foggy window panes .... It's as if the air is drenched in moisture!   How shoe and clothing companies can cope with the return of southern weather   ① Monitor the roofs of offices, workshops and warehouses for water seepage, leakage and accumulation, and deal with them promptly. ②Check the drainage facilities in the factory to ensure that the drainage equipment is intact. ③Ensure that doors and windows can be fully sealed when closed, and install curtains to block the intrusion of outside water vapour if necessary. ④Keep the factory floor dry and tidy, and do a good job of preventing moisture on the floor; if necessary, use hot salt water to mop the floor to speed up the evaporation of moisture. ⑤ Take appropriate stacking measures according to the nature of the materials; place packages and finished products at least 60cm from the wall, 15cm from the floor and 1m from doors and windows, and use plastic pads or place them on shelves; seal unused packages in good time. ⑥ The placement of raw materials and semi-finished products, in order to avoid being rained on or soaked, the area where the materials are placed should pay attention to the seepage of water from the roof and external walls, and do a good job of checking for water accumulation and cracks, and deal with them in a timely manner.   Dehumidification method   Intermittent ventilation method: open windows and ventilate on sunny days to accelerate the rate of water evaporation; on cloudy days, only downwind doors and windows need to be opened to reduce water vapour into the room; (morning and evening air water are relatively large, it is not recommended to open windows;)   Use of dehumidifiers: dehumidification/moisture control work needs to be carried out promptly if the humidity is above 60%.   Use warehouse desiccant to absorb moisture:   Topone’s TOP-1000 desiccant can absorb moisture in the air and goods in all directions, at least up to 300% of its own weight, absorb moisture for up to 3 months or more, the effect of moisture absorption is obvious, avoiding the outer box of the carton from being damp and soft; you can also use Topone’s CASANO PLUS, dehumidification, antibacterial, double effect control.    

If you look carefully, whether the garment is sold domestically or abroad, many garment bags now have a small packet of desiccant inside. Whether it is a T-shirt, jeans, dress or leather jacket, the desiccant can be found inside the bag. Clothing has a much higher moisture content than normal metal, electronic and other products, and if it is a leather garment, then the amount of desiccant needs to be increased. Garments have a high water content and are prone to mold, so it is very important to pay attention to moisture control; in addition to this, garments are different from other products, any occurrence of moisture will bring direct damage, such as fading, wrinkling, deformation and so on, which will make the most fashionable and latest design of garments turn into tailor-made goods and disposal goods.  For products such as clothing that are sensitive to moisture, we generally recommend that the production process, storage and transport are all done to minimise the occurrence of moisture. In the production process, without affecting the quality of the garment style, it is important to select textile fabrics and garment accessories that contain as little water as possible, so as to minimise the water content of the garment fabric and avoid the problem of moisture. In the storage process is also not to ignore the work of moisture control. It is recommended that garment enterprises choose Topone desiccant, Topone was founded in 1995 and is one of the first enterprises in China to produce dry and mildew-proof products. Since its inception, mainly engaged in anti-mold, anti-bacterial, moisture, deodorant products of research and development manufacturing, aimed at providing customers with shoes and clothing, bags, furniture, gift packaging and other products anti-mold comprehensive solutions.

The summer weather is hot and humid, suitable for a variety of bacteria, germs breeding breeding, home clothing is easy to moisture, then, in this weather we should how to prevent mold?     01 Ways to prevent moisture 1, you can put an appropriate amount of desiccant in the clothing, and then seal it up, desiccant has a good water absorption effect, and has a very good effect on inhibiting the growth of mould. After the desiccant is used up, it should be discarded in the rubbish bin.           2、Don't put the clothes too full. Clothes contain some moisture, if they are piled up in large quantities, there will be no space for moisture to escape.        3. Don't tidy up your clothes on a rainy day to avoid moisture invading your wardrobe; you can buy moisture-absorbing boxes, activated charcoal, etc. to put in your wardrobe, and remember to close the wardrobe door.       4. clothes in the wardrobe before, to try to dry, every half month to a month to take clothes from the wardrobe out of the air, sunshine, clothing maintenance is also beneficial.       02 clothing moisture mold how to do   Cotton clothes         There are mildew spots, available a few mung bean sprouts, repeatedly rubbing in the place where there is mildew, and then rinse with water, the mildew will be removed.       Tweed clothes       When mold appears, first put the clothes in the sun for a few hours, and after drying, gently brush off the mould with a brush.   If it is due to oil stains, sweat stains and caused by mold, you can use a soft brush dipped in some gasoline in the place where there is mold repeatedly brush, and then repeatedly wipe a few times with a clean towel, put in a ventilated place to dry.     Silk clothes       With mildew, first soak the silk in water with a brush, if the mildew is more, very heavy, you can have a mildew spot in the place, apply some small amount of alcohol solution, repeatedly scrubbing a few times, you can quickly remove the mildew spots.     Leather clothes       The moldy spots can be wiped repeatedly with a towel dipped in some soapy water to remove the dirt, immediately rinse with water, then dry, then apply some jacket oil.     Fibre clothes       Moldy spots, you can first use a towel dipped in some thick soapy water brush, and then rinse with warm water once, the mold can be removed.

Why is the export of furniture susceptible to moisture and mold?   In recent years, due to the impact of the epidemic supply chain, port congestion, the original logistics time lengthened a lot, so sellers also need to take into account the pre-treatment of some furniture products moisture storage to avoid affecting sales due to product moisture.     Furniture is generally wood or leather-like materials, rich in protein, starch, oil and other elements, itself has the nutrient environment required for the growth of mold, plus, furniture products in the transportation process, the container temperature difference between day and night, vulnerable to the container rain, moisture brought about by the infringement, easy to cause mold, bacteria and damage to the goods, resulting in huge losses. For example, leather furniture is easy to harden after the moisture, some corners of the surface mold, and even some furniture will be deformed after the moisture, fading; artificial board furniture is easy to expand and damage after the moisture, and rattan furniture due to more crevices, it is easy to hide ash, humid and hot environment is easy to make the rattan furniture crevices produce mold.   Then import and export furniture how to do a good job of preventing moisture!         How to prevent furniture from damp?   Here are 4 suggestions for you to prevent furniture products from getting damp.     First, in the warehouse, equipped with a humidity tester, and arrange for the duty officer to do daily written humidity detection, records, timely follow-up of the humidity situation, to ensure that the humidity of the warehouse in a reasonable range of values.       Second, in the warehouse, equipped with a dehumidifier power supply to match the warehouse area. Strictly control the relative humidity of the air in the warehouse at less than sixty percent, and control the outdoor drainage of the dehumidifier pipeline, timely cleaning of the dehumidifier filter.     Third, try to shorten the storage time of the packaging in the warehouse and the shipping time after the finished product is completed.   Fourth, the desiccant with strong moisture absorption capacity is placed in the furniture, which can reduce the relative humidity of the air inside the sofa to a certain extent. It is recommended to use sunflower desiccant with it. Sunflower desiccant can absorb moisture in the air and goods in all directions, at least 200% of its own weight (laboratory: 280%), which is more than 10 times of the effect of ordinary desiccant, and continues to absorb moisture within 60 days, which can completely ensure that the customer's goods are in good condition and not affected by moisture when they are delivered to the destination.     Fifth, when exporting containers, CASANO container drying rod is hung in the container to reduce the relative humidity of the air in the container, prevent the container from getting wet and avoid moldy products.     The transaction of goods can not be separated from the strict product control and product storage management, storage environment as finished products, semi-finished products, raw materials flow of the transit station, is an important link of product storage, good storage of mold and moisture, to ensure the safety and stability of the transport process, not only to reduce the economic loss of enterprises, but also to maintain a good brand image, to empower enterprises.   About us   Topone anti-mold technology specializes in the research, development and production of anti-mold, anti-bacterial, moisture-proof and anti-odor products, aiming to provide comprehensive solutions for mold prevention of shoes and clothing, bags, furniture, gift packaging and other products, and reduce the claims and losses caused by moisture and mold in the storage process. Topone anti-mold products are the first to complete the EU REACH pre-registration, is the first mainland through the Biocide Product Regulation (BPR) and the U.S. Environmental Protection Agency (EPA) certification of registration, product quality in full compliance with the latest laws and regulations in Europe and the United States. While the products keep seeking new and changeable, we take the responsibility of reasonable price, high quality products and comprehensive service to ensure the highest interest of our customers. If you have questions about molds, please feel free to contact us!